Connecting a Windows Device to the Wireless Network?
- If you are not a WPI Community member, but your home institution supports eduroam, please connect to the eduroam Wireless Network on campus.
- If you do not have a WPI account, please visit Wireless Guest Access for further information.
- Make sure that the date, time and timezone are properly set. Proper time and timezone are required for wireless encryption.
Step 1 - Get Connected!
- Unplug your wired Ethernet connection
- Connect to the WPI-Wireless-Setup wireless network
Step 2 - Open the WizardOpen your web browser to https://wpi-wireless-setup.wpi.edu/
Step 3 - Acceptable Use PolicyIn order to use the WPI Wireless network, you must understand and agree to the WPI Acceptable Use Policy. Once you have a complete understanding of the policy, select the checkbox and click Start.
Step 4 - Registration WarningIf you have not registered your device in the Wireless: Mobile Wireless Systems IP Range through the Network Registration page, you should do so now. While connected to the WPI-Wireless-Setup network:
- Visit http://netreg.wpi.edu/ and login with your WPI Username and Password
- Quick Registration will identify you
- Select IP Range Wireless: Mobile Wireless Systems
- Name the computer and choose an Operating System
- Wait up to 30 minutes to process the registration
If the Quick Registration is not displayed, please refer to Registering a computer for use on the Wireless Network for help.
Step 5 - AuthenticationProvide your WPI Username and Password. Do not use any WPI credentials other than your own.
Step 6 - ActiveX InstallationIf you are using Internet Explorer, the CloudPath provisioning software will attempt to execute an ActiveX add-on. To continue, you will need to click the Install button and allow XpressConnect to install and execute.
Step 6 - Java InstallationIf you are using Chrome, Firefox or Internet Explorer with ActiveX disabled, the CloudPath provisioning software will attempt to execute a Java applet. To continue, you will first need to allow the Java SE Runtime to run. Then you will need to tell Java that you want to run the XpressConnect Enrollment System.
Step 7 - XpressConnectOnce the web browser has installed XpressConnect, the application will run. You will be prompted to allow the installation of several Security Certificates. You may also be prompted to run a Command Prompt with elevated permissions.
XpressConnect cannot identify the wireless network cardThere are some reported cases in which XpressConnect cannot initially identify the wireless network card and reports an error when the user selects the correct one from the drop down list. This has been reported in Windows 8 and Windows 8.1 systems. In these cases, close XpressConnect and click Start Over to start the wizard over has been reported to work. Screenshots of the error messages are below.
Step 8 - Success!After XpressConnect has completed - it will display a Successfully connected message and a web browser window will open displaying http://www.wpi.edu/.
Common ProblemsThe most common reason XpressConnect will fail is that the wireless device has not been registered in http://netreg.wpi.edu/. XpressConnect may display a message that An IP address was not acquired within the allotted time. If this is a newly registered device, please wait 30 minutes and try again.
Maintained by firstname.lastname@example.org
Last modified: Aug 04, 2014, 14:11 EDT