MTE 509. ELECTRON MICROSCOPY
This course introduces students to the theory, fundamental operating principles, and specimen preparation techniques of scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy dispersive x-ray spectroscopy (EDS). The primary emphasis is placed on practical SEM, TEM, and x-ray microanalysis of materials. Topics to be covered include basic principles of the electron microscopy; SEM instrumentation, image formation and interpretation, qualitative and quantitative x-ray microanalysis in SEM; electron diffraction and diffraction contrast imaging in TEM. Various application examples of SEM and TEM in materials research will be discussed. Lab work will be included. The course is available to graduate students. Recommended background: CH1020, PH1120, and ES2001. Note: Students cannot receive credit for this course if they have taken the Special Topics version of the same course.
MTE 511. STRUCTURE AND PROPERTIES OF ENGINEERING MATERIALS
This course, (along with its companion course MTE 512 Properties and Performance of Engineering Materials), is designed to provide a comprehensive review of the fundamental principles of Materials Science and Engineering for incoming graduate students. In the first part of this 2-set sequence, the structure in materials ranging from the sub-atomic to the macroscopic including nano, micro and macromolecular structures will be discussed to highlight bonding mechanisms, crystallinity and defect patterns. Representative thermodynamic and kinetic aspects such as diffusion, phase diagrams, nucleation and growth and TTT diagrams will be discussed. Major structural parameters that effect of performance in materials including plastics, metallic alloys, ceramics and glasses will be emphasized. The principal processing techniques to shape materials and the effects of processing on structure will be highlighted. (Prerequisites: senior or graduate standing or consent of the instructor.) Note: Students cannot receive credit for this course if they have taken the Special Topics version of the same course (MTE 594S).
MTE 512. PROPERTIES AND PERFORMANCE OF ENGINEERING MATERIALS
The two introductory classes on materials science (MTE511 and MTE512) describe the structure-property relationships in materials. In MTE511, the principal structural parameters in metals, ceramics, glasses and plastics were highlighted. The effects of processing on the structure were also discussed. The purpose of this class is to provide a basic knowledge of the principles pertaining to the physical, mechanical and chemical properties of materials. The primary focus of this class will be on mechanical properties. The thermal, tensile, compressive, flexural and shear properties of metallic alloys, ceramics and glasses and plastics will be discussed. Fundamental aspects of fracture mechanics and viscoelasticity will be presented. An overview of dynamic properties such as fatigue, impact and creep will be provided. The relationship between the structural parameters and the preceding mechanical properties will be described. Basic composite theories will be presented to describe fiber-reinforced composites and nanocomposites. Various factors associated with material degradation during use will be discussed. Some introductory definitions of electrical and optical properties will be outlined. (Prerequisites: senior or graduate standing or consent of the instructor.) Note: Students cannot receive credit for this course if they have taken the Special Topics version of the same course (MTE594P).
MTE 520. DESIGN AND ANALYSIS OF MANUFACTURING PROCESSES
The first half of the course covers the axiomatic design method, applied to simultaneous product and process design for concurrent engineering, with the emphasis on process and manufacturing tool design. Basic design principles as well as qualitative and quantitative methods of analysis of designs are developed. The second half of the course addresses methods of engineering analysis of manufacturing processes, to support machine tool and process design. Basic types of engineering analysis are applied to manufacturing situations, including elasticity, plasticity, heat transfer, mechanics and cost analysis. Special attention will be given to the mechanics of machining (traditional, nontraditional and grinding) and the production of surfaces. Students, work in groups on a series of projects.
MTE 526. ADVANCED THERMODYNAMICS
Thermodynamics of solutions?phase equilibria? Ellingham diagrams, binary and ternary phase diagrams, reactions between gasses and condensed phases, reactions within condensed phases, thermodynamics of surfaces, defects and electrochemistry. Applications to materials processing and degradation will be presented and discussed. (Prerequisites: ES 3001, ES2001) Note: Students cannot receive credit for this course if they have taken the Special Topics version of the same course (MTE594T).
MTE 532. X-RAY DIFFRACTION AND CRYSTALLOGRAPHY
This course discusses the fundamentals of crystallography and X-ray diffraction (XRD) of metals, ceramics and polymers. It introduces graduate students to the main issues and techniques of diffraction analysis as they relate to materials. The techniques for the experimental phase identification and determination of phase fraction via XRD will be reviewed. Topics covered include: basic X-ray physics, basic crystallography, fundamentals of XRD, XRD instrumentation and analysis techniques. (Prerequisites: ES 2001 or equivalent, and senior or graduate standing in engineering or science.) Note: Students cannot receive credit for this course if they have taken the Special Topics version of the same course (MTE594C).
MTE 540. ANALYTICAL METHODS IN MATERIALS ENGINEERING
Heat transfer and diffusion kinetics are applied to the solution of materials engineering problems. Mathematical and numerical methods for the solutions to Fourier?s and Pick?s laws for a variety of boundary conditions will be presented and discussed. The primary emphasis is given heat treatment and surface modification processes. Topics to be covered include solutionizing, quenching, and carburization heat treatment. (Prerequisites: ME 4840 or MTE 510 or equivalent.)
MTE 547. MTRLS FR ELECTROCHEM ENRGY SYS
MTE 550. PHASE TRANSFORMATIONS IN MATERIALS
This course is intended to provide a fundamental understanding of thermodynamic and kinetic principles associated with phase transformations. The mechanisms of phase transformations will be discussed in terms of driving forces to establish a theoretical background for various physical phenomena. The principles of nucleation and growth and spinodal transformations will be described. The theoretical analysis of diffusion controlled and interface controlled growth will be presented . The basic concepts of martensitic transformations will be highlighted. Specific examples will include solidification, crystallization, precipitation, sintering, phase separation and transformation toughening. (Prerequisites: MTE 510, ME 4850 or equivalent.)
MTE 555. FOOD ENGINEERING
An introductory course on the structure, processing, and properties of food. Topics covered include: food structure and rheology, plant and animal tissues, texture, glass transition, gels, emulsions, micelles, food additives, food coloring, starches, baked goods, mechanical properties, elasticity, viscoelastic nature of food products, characteristics of food powders, fat eutectics, freezing and cooking of food, manufacturing processes, cereal processing, chocolate manufacture, microbial growth, fermentation, transport phenomena in food processing, kinetics, preserving and packaging of food, testing of food. Recommended Background: ES 2001 or equivalent. This course will be offered in 2012-13 and in alternating years thereafter.
MTE 556. SMART MATERIALS
A material whose properties can respond to an external stimulus in a controlled fashion is referred to as a smart or intelligent material. These materials can be made to undergo changes modulus, shape, porosity, electrical conductivity, physical form, opacity, and magnetic properties based on an external stimulus. The stimuli can include temperature, pH, specific molecules, light, magnetic field, voltage and stress. These stimuli-sensitive materials can be utilized as sensors and as vehicles for the controlled delivery of drugs and other biomolecules in medical applications. Smart materials are also becoming important in other biological areas such as bio-separation, biosensor design, tissue engineering, protein folding, and microfluidics. The use of stimuli-sensitive materials is receiving increasing attention in the development of damage tolerant smart structures in aerospace, marine, automotive and earth quake resistant buildings. The use of smart materials is being explored for a range of applications including protective coatings, corrosion barriers, intelligent batteries, fabrics and food packaging. The purpose of this course is to provide an introduction to the various types of smart materials including polymers, ceramic, metallic alloys and composites. Fundamental principles associated with the onset of ?smart? property will be highlighted. The principles of self-healable materials based on smart materials will be discussed. The application of smart materials in various fields including sensors, actuators, diagnostics, therapeutics, packaging and other advanced applications will be presented. Note: Students cannot receive credit for this course if they have taken the Special Topics version of the same course.
MTE 558. PLASTICS
This course will provide an integrated overview of the design, selection and use of synthetic plastics. The basic chemistry associated with polymerization and the structure of commercial plastics will be described. Various aspects of polymer crystallization and glass transition will be outlined. Salient aspects of fluid flow and heat transfer during the processing of plastics will be highlighted. Fundamentals of the diverse processing operations used to shape plastics and the resulting structures that develop after processing will be discussed. The mechanical behavior of plastics including elastic deformation, rubber elasticity, yielding, viscoelasticity, fracture and creep will be discussed. Plastic degradation and environmental issues associated with recycling and disposal of plastics will be examined. Typical techniques used in the analysis and testing of plastics will be described and a working knowledge of various terminologies used in commercial practice will be provided. Note: Students cannot receive credit for this course if they have taken the Special Topics version of the same course (MTE594A).
MTE 561. MECHANICAL BEHAVIOR AND FRACTURE OF MATERIALS
The failure and wear-out mechanisms for a variety of materials (metals, ceramics, polymers, composites and microelectronics) and applications will be presented and discussed. Multi-axial failure theories and fracture mechanics will be discussed. The methodology and techniques for reliability analysis will also be presented and discussed. A materials systems approach will be used. (Prerequisites: ES 2502 and ME 3023 or equivalent, and senior or graduate standing in engineering or science.) Note: Students cannot receive credit for this course if they have taken the Special Topics version of the same course (MTE593C/MTE594C).
MTE 575. INTRODUCTION TO NANOMATERIALS AND NANOTECHNOLOGY
This course introduces students to current developments in nanoscale science and technology. The current advance of materials and devices constituting of building blocks of metals, semiconductors, ceramics or polymers that are nanometer size (1- 100 nm) are reviewed. The profound implications for technology and science of this research field are discussed. The differences of the properties of matter on the nanometer scale from those on the macroscopic scale due to the size confinement, predominance of interfacial phenomena and quantum mechanics are studied. The main issues and techniques relevant to science and technologies on the nanometer scale are considered. New developments in this field and future perspectives are presented. Topics covered include: fabrication of nanoscale structures, characterization at nanoscale, molecular electronics, nanoscale mechanics, new architecture, nano-optics and societal impacts. Recommended background: ES 2001 Introduction to Materials or equivalent.
MTE 580. MATERIALS SCIENCE AND ENGINEERING SEMINAR
Reports on the state-of-the-art in various areas of research and development in materials science and engineering will be presented by the faculty and outside experts. Reports on graduate student research in progress will also be required.
MTE 594. SPECIAL TOPICS
Theoretical or experimental studies in subjects of interest to graduate students in materials science and engineering. See the SUPPLEMENT section of the on-line catalog at www.wpi.edu/+gradcat for descriptions of courses to be offered in this academic year.
MTE 5420. FUNDAMENTALS OF AXIOMATIC DESIGN OF MANUFACTURING PROCESSES
This on-line only, seven week, two credit course includes an in-depth study of axiomatic design, the theory and practice. Applications are considered primarily, although not exclusively, for the design of manufacturing processes and tools. Axiomatic design is based on the premise that there are common aspects to all good designs. These commons aspects, stated in the independence and information axioms, facilitate the teaching and practice of engineering design as a scientific discipline. Analysis of processes and products is considered from the perspective of supporting product and process design. Fundamental methods of engineering analysis of manufacturing processes with broad applicability are developed. Special attention is given to examples in machining (traditional, nontraditional and grinding), additive manufacturing, and to the production of surfaces. The ability to generalize is emphasized to facilitate development of analyses and design methods with broader applicability. The content is delivered in video lectures and in readings from the technical literature. The grade is from performance on homework and quizzes given and delivered on-line and on a design project on manufacturing processes. Projects can be from work or dissertations on many kinds of systems and services, in addition to traditional manufacturing processes and tools. Credit cannot be given for this course and any of the similar, in-class versions for 3 credits, MFE520, MTE520 and ME543.
MTE 5816. CERAMICS AND GLASSES FOR ENGINEERING APPLICATIONS
This course develops an understanding of the processing, structure, property, performance relationships in crystalline and vitreous ceramics. The topics covered include crystal structure, glassy structure, phase diagrams, microstructures, mechanical properties, optical properties, thermal properties, and materials selection for ceramic materials. In addition the methods for processing ceramics for a variety of products will be included. Recommended background: ES2001 or equivalent. Note: Students cannot receive credit for this course if they have taken the Special Topics version of the same course (MTE594G).
MTE 5841. SURFACE METROLOGY
This course emphasizes research applications of advanced surface metrology, including the measurement and analysis of surface roughness. Surface metrology can be important in a wide variety of situations including adhesion, friction, catalysis, heat transfer, mass transfer, scattering, biological growth, wear and wetting. These situations impact practically all the engineering disciplines and sciences. The course begins by considering basic principles and conventional analyses, and methods. Measurement and analysis methods are critically reviewed for utility. Students learn advanced methods for differentiating surface textures that are suspected of being different because of their performance or manufacture. Students will also learn methods for making correlations between surface textures and behavioral and manufacturing parameters. The results of applying these methods can be used to support the design and manufacture of surface textures, and to address issues in quality assurance. Examples of research from a broad range of applications are presented, including, food science, pavements, friction, adhesion, machining and grinding. Students do a major project of their choosing, which can involve either an in-depth literature review, or surface measurement and analysis. The facilities of WPI?s Surface Metrology Laboratory are available for making measurements for selected projects. Software for advanced analysis methods is also available for use in the course. No previous knowledge of surface metrology is required. Students should have some background in engineering, math or science.
MTE 5844. CORROSION AND CORROSION CONTROL
An introductory course on corrosion; aqueous corrosion, stress corrosion cracking and hydrogen effects in metals will be presented. High-temperature oxidation, carburization and sulfidation will be discussed. Discussions focus on current corrosive engineering problems and research. (Prerequisites: MTE511 and MTE512 or consent of the instructor.) Note: Students cannot receive credit for this course if they have taken the Special Topics version of the same course (MTE594D).
MTE 5847. MATERIALS FOR ELECTROCHEMICAL ENERGY SYSTEMS
An introductory course on electrochemical engineering, fuel cells and batteries. With escalating oil prices and increasing environmental concerns, increasing attention is being paid to the development of electrochemical devices to replace traditional energy. Here several types of batteries and fuel cells will be discussed. Topics covered include: basic electrochemistry, lithium ion battery, proton exchange membrane fuel cell, solid oxide fuel cell, electrochemical method. Recommended background: ES2001 or equivalent. Note: Students cannot receive credit for this course if they have taken the Special Topics version of the same course (MTE 594E).