Robotics Engineering Master's Practicum Presentation: Jack Kamataris

Tuesday, December 1, 2026
6:00 p.m. to 6:30 p.m.
Floor/Room #
Room 218

Encoder-Synchronized FPGA Data Acquisition for High-Speed Optical Interferometric Sensing on a Precision Robotic Gantry

Jack Kamataris

Abstract: Optical interferometric sensing on a moving robotic platform requires each measurement to be tied to a precise physical position. That makes the acquisition system a motion-control problem as much as a signal-processing one. This thesis presents the design, implementation, and bring-up of a next-generation sensing system for a precision multi-axis robotic gantry. The new system replaces a legacy embedded-processor platform with a dedicated FPGA-based architecture aimed at higher speed, higher precision, and lower cost.
      The system combines networked servo control and sub-micron position encoding with a custom low-noise analog front end. Optical signals are conditioned and digitized at high resolution, then passed to an FPGA acquisition chain that buffers position-tagged samples in external memory and streams them to a host computer.
      The system acquires one sample per encoder tick, so every measurement maps directly to a physical position along the stroke. A central contribution is keeping that synchronization intact at full sweep speed, where encoder events arrive at rates near the limit of the digitizer. The thesis also covers high-speed digital link calibration, data handling across clock domains, and the power and grounding design of a multi-channel analog front end. End-to-end operation is demonstrated by capturing live interferogram fringes during real motion. The thesis closes with the path to simultaneous multi-channel capture and reference-based matched filtering for near-real-time signal recovery.

Advisor: Professor William Michalson
Committee: Hans-Christian Luedemann, Professor John McNeill